Latest activity

  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    Just some images of the beaching gear coming together. B3B60BC2-04AF-4C1F-8FD7-09C6863CAAAD by Alex Jones, on Flickr...
  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    Moving onto the beaching gear… This will be really important for us and was designed in partnership with PES Performance Ltd. This can...
  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    I’ve been putting off doing the Pitot for ages as it was one of those jobs that had the potential to cause some damage if I got it...
  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    The electrics in the forward section are run through 3D printed conduits that feed into the main box where the CB400 is mounted. There...
  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    Like the 3D printed splash proof boxes for the electronics I decided to go a similar route with the fuselage electrical split. I...
  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    While things are easy to access I tested the fuel systems on both tanks. It’s a good opportunity to check for any small leaks, it beds...
  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    The tail wheel on the SeaDart was a castor so it could be easily manoeuvred by ground crew while on its beaching gear. I decided to...
  • ALEX TLJC
    Hi Lenny, I hope you are well and thank you for the message. We’ve managed ok through all that has happened since March but it has...
  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    The intakes have been causing me a headache as they are very difficult to remove. They also require the turbines to be removed which...
  • L
    LennyO replied to the thread TLJC 1/6th Hyper Scale F105D Kit.
    Hi Alex, I hope you, your family, and colleagues have weathered and withstood the world health crisis this year. I remain very excited...
  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    Hi Dave, These are the fuel air traps, one for each fuel system. With the fuselage split I can get on with what seems to be a never...
  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    With all the electrics in the aft section tested and working as planned I can make things a little neater. In the electronics box just...
  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    I started the main installation by removing everything from the engine test stand and installing this into place inside the fuselage. I...
  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    I like the systems side of things and always enjoy this part of any installation but before I start on the electronics I had to accept...
  • ALEX TLJC
    ALEX TLJC replied to the thread The Model (Phase 4).
    A short video on the water rudder setup. The squeaky right rudder was binding a little with the exhaust shroud... it's no longer :)
Top